China Shipbuilding
  |    | 
   跳过导航链接
新造船展开 新造船
 集装箱船 |  超大型集装箱船
 
 
 
 

18,000 TEU Container Vessel -- Designed by Marine Design & Research Institute of China (MARIC)
 

The vessel to be designed and constructed as an environmentally friendly, all welded steel, single screw, diesel engine driven fully cellular container ship with a transom stern, a raked stem with protruded bulbous bow, a full spade rudder and one continuous deck.All accommodation including navigation bridge shall be located at foreship and engine room shall be located at semi-aft. (twin island).
 
MAIN PARTICULAR
- Length (o.a.):     abt.  399.20 m
- Length (b.p.):           381.40 m
- Breadth, moulded:         54.00 m
- Depth, moulded:           30.20 m
- Designed draft:           14.50 m
- Scantling draft:          16.00 m
- Deadweight @ Ts:   abt. 184,000 mt
- Air draft:                70.00 m

SERVICE SPEED:       abt. 22.0 kn (scantling draft, at NCR with 15% sea margin)

ENDURANCE:           abt. 27,000 n.miles

COMPLEMENT:          40 Persons+7 Suez

CLASSIFICATION
- BV: I+HULL, +MACH, Container Ship, Unrestricted Navigation, VERISTAR-HULL, (DFL25), WHISP2, AUT-UMS, MON-SHAFT, INWATER-SURVEY, SYS-NEQ-1, CPS(WBT), CLEANSHIP(3), AUT-PORT, LASHING, ALP, SDS, FORS
or equivalent ABS, DNV, LR, GL

TANK CAPACITY
- Heavy fuel oil tanks:       abt. 15,000

- Marine diesel oil tanks:    abt.    500 m³
- Fresh water tanks:          abt.    800 m³
- Cylinder oil storage:       abt.    250 m³

CONTAINER CAPACITY
With max. number of containers (IMO visibility guidance)
- On deck:     abt. 10,378 TEU
- In hold:     abt.  7,481 TEU
- Total:       abt. 17,859 TEU

* Rows max. in holds / on hatches:   19 / 21 Rows
* Tiers max. in holds / on hatches:  11 / 11 Tiers
* (El. Plugs (for reefer container): 1,400 FEU
Homogenous 14t / TEU at scantling draft: abt. 11,800 TEU (based on 9 ft 6 inches, 45% container V.C.G)
 
MAIN ENGINE
- Model:                1 x MAN B&W 11S90ME-C9.2
- MCR:                  63,910 kW x 84 rpm
- Fuel oil consumption: abt. 50.90 mt / day

POWER SUPPLY
- Main diesel generators:   4 x 4,300 kW
- Emergency generator:      1 x 300 kW


16,000 TEU Container Vessel -- Designed by Marine Design & Research Institute of China (MARIC)

MAIN PARTICULAR

- Length (o.a.) 399.00m
- Length (b.p.) 382.00m
- Breadth moulded : 54.00m
- Depth moulded : 30.20m
- Design draft moulded : 14.50m
- Scantling draft moulded : 16.00m
- Air draft above baseline : Appx. 69.00m

Deadweight in sea water At scantling draft, moulded : Appx. 182,000 MT

Service speed at moulded design draft and at 90% MCR power of main engine and 15% sea margin at calm sea. : Appx. 23.3 knots

CAPACITIES (100%)
- Water ballast tanks (Including anti-heeling tank) : Appx. 48,000 m³
- Heavy fuel oil tanks (Incl. settling and service tanks) : Appx. 13,500 m³
- Diesel oil tanks (Incl. settling and service tanks) : Appx. 500 m³
- Lub oil tanks : Appx. 500 m³
- Fresh water tanks : Appx. 400 m³

MAIN ENGINE (MAN B&W 12S90ME-C9.2, EGB part load)
- MCR : 69,720 kW x 84 r/min
- CSR (90% MCR) : 62,748 kW x 81.1 r/min

CONTAINER LOADING
The containers to be carried principally are ISO type 8’ wide, 8’ 6”/9’6’ high and 20/40/45 feet length.

Nineteen (19) rows, eleven (11) tiers of 8’ 6” high container should be stowed in way of midship hold section, by the way, twenty-one (21) rows, nine (9) tiers of 8’6” high container on hatch covers.

Number of loadable containers
Max. container capacity (Considering IMO visibility at even keel condition)
For all 8 feet 6 inches high container
On deck/hatch Appx. 8,668 TEU
In hold Appx. 7,310 TEU
Total Appx. 15,978 TEU

Total number of reefer container: abt. 1,400 FEU plugs on hatch

The number of 14t/TEU homogeneous loading container at scantling draft shall be about 11,880TEU based on the 8’6” high cubic container with VCG as 45% of height.

The number of 12t/TEU homogeneous loading container at scantling draft shall be about 13,300TEU based on the 8’6” high cubic container with VCG as 45% of height.


 

21,000 TEU Container Vessel -- Designed by Hudong-Zhonghua Shipbuilding (Group) Co., Ltd.

21,000 TEU Container Vessel is a new container vessel developed by Hudong-Zhonghua Shipbuilding (Group) Co., Ltd. The vessel has 11 cargo holds where 22 rows with 12 tiers of containers can be arranged, 24 rows with 11 tiers of containers can be arranged on deck. Total container capacity is 21002teu. This vessel is designed with long stroke main engine. After dimension optimization, the vessel is developed with dimensions of Loa 399.9m, molded breadth 58.6m, it is expected to be the biggest type vessels deployed for Asia-Europe role. This vessel is designed in compliance with MLC2006, Hongkong Convertion. CSS Code, EEDI top restriction and other latest regulation. Meanwhile, it is furnished with ballast water treatment system and environment-friendly features. Successful development of this vessel will gratly improve the domestication process of Ultra-large container ship design in China, and built up strong technical base to win batch orders in the future.

MAIN PARTICULAR
- Length (o.a.)               399.90 m
- Breadth moulded :            58.60 m
- Depth moulded :              33.00 m
- Design draft moulded :       14.50 m
- Scantling draft moulded :    16.50 m
- Container Capacity:       21,002 TEU
- Service Speed:               22.0 kn

Propeller: Fix pitch x 1

Complement: 30P

MAIN ENGINE
- Model:                       Wartsila W11 X 92 or MAN B&W 11S90ME-C
- SMCR:                        56,700 kW


 
支线型集装箱船(2000 TEU 及以下)
支线型集装箱船(2000-3500 TEU)
中型集装箱船(3500-8000 TEU)
巴拿马型集装箱船(8000-15000 TEU)
 
 江南造船获得太平船务4艘14000TEU集装箱船订单 (2022-03-07)
 黄埔文冲获得中联航运2艘2700TEU集装箱船订单 (2022-02-15)
 现代重工获得马士基4艘16000TEU超大型集装箱船订单 (2022-01-11)
 现代尾浦获得达飞集团10艘2000TEU集装箱船订单 (2021-12-07)
 黄海造船获得挪威“Blystad”两艘1800箱支线型集装箱船订单 (2021-11-17)
 马尾造船获得孟加拉国“HR Lines”4艘2900箱集装箱船订单 (2021-10-07)
more 更多信息


 
如果您有意建造新船,请留言并留下您的联系方式:

China Shipbuilding, 2014